Fairlight Prodigy 2, Руководство пользователя

Страница: 5 / 69

5
CC E
MISSION
C
ONTROL
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.
The Prodigy 2 Surface and Engine conform to the EMC directives :-
EN 55022:1998 Class A - Emissions
EN 55024:1998 Class 3 - Susceptibility
The Prodigy 2 Surface and Engine also conform to the Safety directives :-
UL 1419 - Professional Video & Audio Equipment
IEC 60950 - Information Technology Equipment
For further information on EMC procedures please refer to the following titles:-
Noise Reduction Techniques In Electronic Systems by Henry W Ott
EMC by Tim Williams
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense. Changes
or modifications not expressly approved by Fairlight ESP can affect emission compliance and
could void the user’s authority to operate this equipment.
C
ERTIFICATES
& C
OMPLIANCES
CHARACTERISTICS DESCRIPTION
Equipment Type Supplemented Data: Information Technology
Equipment Class Supplemental Data: Class 1 - Grounded equipment
Installation Catergory
Requirement Category 2 - Local level appliances,
portable equipment etc.
Pollution Degree
Requirement: Level 2 operating environment -
Normally only non-conductive pollution occurs.
Occasionally there may be a temporary conductivity
caused by condensation.