7
This document remains the property of FBHS (Aust) Pty Ltd
Feb 2019 – Version 2
NOTE: The post sleeve on base plate comes in 2-hole or 4-hole depending on the size and the
requirements of the carport. Refer to the Engineering Plans for the specifications of the post
sleeve.
Step 5 – Preparation of Rafters
On the outer web side of the Rafters, set-out and attach the shorter leg of the angle cleat bracket
with 2 frame bolts. This bracket will be fitted inside the web of the beam. Refer to Diagram E.
NOTE: Triangular carport knee braces run in two directions, along the sidewall between the rafter
and the post and along the endwall between the beam and the post. Refer to Step 13 for detailed
instructions of the Gusset Plate.