FagronLab PRO, Руководство пользователя

Страница: 24 / 36

FagronLab™ PRO – User Manual | 24
FagronLab™ PRO
Emulsion (Solution ointment)
With the mixing program "Emulsion" liquid components can be incorporated into hydrophilic foundations at room temperature.
As an example, the preparation of aqueous hydrophilic ointment, aqueous lanolin alcohol ointment or eucerin c. aqua aa. To
ensure a homogenous distribution we recommend applying disp. blades for jar sizes up to 200 ml and the standard mixing blades
for larger batches.
First, weigh out the entire amount of required foundation ground-covering inside the jar.
Then add the required amount of liquid or solution by room temperature.
The jar bottom should be pushed up as far as possible to prevent incorporating air.
In some cases emulsifying refrigerated foundations can cause difficulties. In this case the process of emulsification can be
accelerated by adding the required liquid warmed.
Em
With the mixing program "E" liquid components can be incorporated into a melted foundation and cooling down
parameters.
As an example, the preparation containing emulsific. aquosa, lannette or cera.
To ensure a homogenous distribution we recommend applying disp. blades for jar sizes up to 200 ml and the standard mixing
blades for larger batches.
The jar is heat resistant up to 85 °C / 185 °F and can be used in a hot-water bath or microwave. The melting components can be
melted directly in the jar.
If there is no water in the formulation, the components can be melted directly in the jar on a hot-water bath. Formulation
containing an aqueous phase can be melted in a hot-water bath or the microwave, leave the regular nozzle open and set the
microwave to a low power setting. The temperature control with a thermometer should take place in short intervals to make sure
the compound is not overheating.
To support the cool down process with the FagronLab™ PRO a cooling cuff can be used around the jar and the mixing process for
larger jar sizes can be repeated.
Gel
With the mixing program "Gel" gelling agents can be incorporated into fluids or semi-solid foundation.
As an example, the preparation of ultrasonic contact gel, hydroxypropyl cellulose 400. Also incorporation gelling agents like
bentonite or Aerosil into a semi-solid foundation.
To ensure a homogenous distribution we recommend applying disp. blades for jar sizes up to 200 ml and the standard mixing
blades for larger batches.
The fluid component will be weighed out first into the FagronLab™ jar. Soluble active substances can be administered directly into
the jar and dissolved. The gelling agent will be dispersed on top of the liquid component.
If the swelling agent will be incorporated into a semi-solid foundation, the gelling agent can be covered between two foundation
layers. This will obtain a faster dispersion of the gelling agent into the foundation.