50
OPERATION
Timer countdown can be set independently for all cooking zones.
Timer
Timer function makes cooking easier by making it possible to set Duration. It can also be used
as a Kitchen Timer.
Set the Timer
Timer function allows the cooking zone to be switched off after the set time has elapsed. The
timer function can only be set when a cooking zone is operating (heat setting is greater than
"0"). The timer function can be set independently for all individual cooking zones. Timer count-
down can be set from 1 to 99 minutes.
To set the timer:
● select a cooking zone by touching cooking zone selection sensor field (
3
) and select the
desired heat setting from 1 to 9 by sliding your finger across the heat setting selection sen-
sor field (
2
). The display will show the selected heat settings from 1 to 9.
● then, during the next 10 seconds, touch the Timer selection sensor field (
4
). "
00
" will be
shown on the Timer display (
4
) and the appropriate Timer activation indicator light (
5
) will
light up to indicate activation of the Timer function for the relevant cooking zone.
● Now, select the desired Timer setting by sliding your finger across the setting selection
sensor field (
2
). The second digit is set first and the first digit is set next. Once the second
digit is set, touch the sensor (
4
) again to set the first digit. If you do not set any value for the
first digit within 10 seconds, the value will be set to "
0
"(eg."
06
").
The countdown starts when the Timer activation indicator light (5) starts flashing.
If more than one timer is set the shortest duration is displayed. Timer indicator
light (5) of a relevant cooking zone will flash.
Change Timer Duration
Check Timer Duration
To check progress of Timer countdown at any time, touch the timer sensor field (
4
). Timer
indicator light (
5
) of a relevant cooking zone will flash.
Programmed Timer setting can be changed at any time.
To change the programmed Timer setting, select a cooking zone by touching the cooking zone
selection sensor field (
3
), and then touch the Timer selection sensor field (
4
).
