Fagor Ingenious, Быстрое руководство по установке

Страница: 40 / 128

Exterior Control Glass Model
Door / Porta
Travel / Férias
Cold/ Frío
Turbo
40
If the Turbo Function is activated you can’t activate the Travel/Ferias Function, and
vice versa. These functions counteract each other.
IMPORTANT
When you activate the Travel/Férias function the cooler door must be closed.
IMPORTANT
Note: To activate functions, touch the desired icon. All functions begin
operating in less than a second.
The Alarm Function will tell you that the cooler door has been open for
longer than one minute, by sounding an alarm and showing an icon on
the screen. It can be activated and deactivated by pressing its button.
You’ll know that the function has been activated as the Alarm animation
will appear on the screen, along with an audible signal, and at the same
time the corresponding icon on the control will light up. These won’t stop
until the function has been deactivated or the door has been closed.
This function saves energy when you go on holidays (use not recommen-
ded for periods longer than 2 weeks). The Travel/Ferias Function is
activated by pressing its icon, and deactivated by pressing on it again or
by opening the cooler door for longer than 10 seconds. You’ll know that
the function has been activated as the animation will appear on the
screen and won’t stop until the function is deactivated.
This function establishes the cold level in your refrigerator on a scale of 1
(least cold) to 9 (coldest). Every time you touch the icon Cold/Frio, it goes
up to the next digit. After 9 it goes back to 1. If the icon remains pressed,
it will keep changing levels until released.
This function accelerates cooling time, and thus speeds up freezing time.
The Turbo Function is directly activated by touching the icon. It is deactiva-
ted by pressing the button again or after completing the optimum cycle
established in accordance to the requirements of each application.
You’ll know that the function has been activated as the Turbo animation
will appear on the screen and its corresponding icon on the control will
light up. It won’t cease until the function has been deactivated or else
approximately one hour after activation.