Fagor Ingenious, Быстрое руководство по установке

Страница: 36 / 128

Lock Function
Cold Level Function
Ice Factory
How to Start
1.
2.
3.
How to Release
1.
2.
3.
36
This function can block the LCD control, stopping anyone else from
changing your programme.
To activate and deactivate, press the Alarm and Holidays buttons
simultaneously for 3 seconds.
You’ll know that the function has been activated as the Lock
animation will begin, where it will remain until the function has been
deactivated. Thus, all other functions will be blocked.
This function establishes the temperature level of your refrigerator on
a scale of 1 (least cold) to 9 (coldest)
Some models come with this ice system, which is found inside the
freezer on the upper left-hand part.
Your system is divided into two parts; the cassette where the
ice-trays are kept and the box where ice is deposited after being
released.
First, place your thumb and index finger between the system’s
knobs, and pull towards you until the cassette comes completely
out.
Place back the cassette, aligning its side tabs with the support
slides of the release and push until it’s completely in place. Make
sure it’s in a horizontal position to avoid spilling water.
Once you’ve removed the cassette, place it on a flat surface and
fill the trays with purified water up to the point where the water
merges. Avoid overfilling the trays as doing so will make the ice
more difficult to remove.
After a while, there will be ice cubes ready in the grilles. Turn the
knobs clockwise, until the ice cubes fall into the drawer below.
Repeat the process if you wish for another load of ice.
This drawer can store up to 800g of ice, or 2 releases of the tray.
To remove the ice simply lift and pull the lower drawer. You can
move this drawer to wherever you’d like.