Fagor CNC 8055i, Руководство по установке

Страница: 624 / 732

·624·
Installation manual
CNC 8055
CNC 8055i
16.
CONFIGURABLE WOR
K
MODE
S
OFT
: V02.2
X
Con
fig
uration
fil
e
The resulting new instructions are:
;(UNMODIFIED W1=GUP170)
Associates the value of a global parameter, variable or resource of the PLC with the (W1)
data. The W1 item of the screen pick ups the editing focus.
;(UNMODIFIED AUTOREFRESH W6=FLWEX)
It refreshes (updates) the value of the graphic element (item) W6, but it does not assign the
editing focus to it.
;(FORMAT W8,LEDBARDEC)
It must be used with Ledbar type (W) data that have a decimal variable associated with them. (For
example: X axis following error).
The values assigned, at the PLC, to the end and intermediate values of a LEDBAR element must
be integer values and must be related to the variable associated at the CNC.
When the associated variable has a decimal format the following instruction must be used:
;(FORMAT W8,LEDBARDEC)
This instruction is used to convert coordinate values (decimal) to integer values by multiplying them
by 10000.
Examples:
To represent the % of axis feedrate, the FRO variable is used. The FRO values are integers
(between 0 and 120) and, therefore, do not require LEDBARDEC.
;(AUTOREFRESH W9=FRO)
On the other hand, to represent the amount of following error on the X axis, the FLWEX variable
is used. The values of FLWEX are not integers and, therefore, require LEDBARDEC (multiplying
it by 10000) in order to make them integers.
;(FORMAT W11,LEDBARDEC)
;(AUTOREFRESH W11=FLWEX)
;(MODALCYCLE)
It indicates that cycle is modal. See programming manual.
The subroutine call is of the (MCALL 9001, A10, B12, C5,....) type
If after executing the cycle, several movements are carried out, the cycle will be executed again after
each movement calling the (MCALL 9001, A10, B12, C5,...) subroutine again.
When using global parameters, the CNC only transfers the global parameters the first time.
First time:
(PCALL 9301, P100=22, P101=32, P102=48)
(MCALL 9001, A10, B12, C5, ... Y8, Z100)
The rest of the times:
(MCALL 9001, A10, B12, C5, ... Y8, Z100)
To cancel this mode, execute the (MDOFF) instruction.
;(END)
It indicates that it has finished debugging the configuration file.
It ignores the instructions programmed next.