Fagor CNC 8055i, Руководство по установке

Страница: 275 / 732

Installation manual
CNC 8055
CNC 8055i
MA
CHINE PARA
METERS
6.
S
OFT
: V02.2
X
·275·
Ether
n
et parameters
• Editing the file "c:\windows\hosts". This file may be modified with any text editor.
In the file, add a line containing the CNC'S IP address and the name to identify it with. For
example:
On the Web browser or from the file explorer (only on Windows 98), write the defined name in
the command line.
For example (CNC without password):
ftp://CNC_01
.
For example (CNC with password):
ftp://cnc:password@MILL_MACH_01
• Through the "Favorites" menu of the Web browser.
In the Web explorer, write the IP address in the command line. After accessing the site, select
the "Favorites" option on the menu add to favorites and assign a name to that IP address. This
way, it is possible to access the CNC by selecting the assigned name on the "Favorites" menu.
CNC connection in an Ethernet network.
Connection using Windows
®
2000 or XP
The easiest way to access the CNC's hard disk from a PC is configuring a new connection. At the
file explorer, select My Network sites > Add network sites. It will show the Windows help to add
network sites that permits configuring the connection step by step. Press the –OK– button to go on
to the next step.
Follow the instructions shown on the screen to configure the connection; refer to the Windows® help
for additional information.
Connection with a shared CNC without password
1. First, select the network site, in this case an ftp folder. Write "
ftp://
" followed by the CNC's
IP address defined by machine parameter DIRIP (P24).
For example:
ftp://10.0.17.62
2. Define how the session is initiated, anonymously or not When the CNC is shared without
password, the session is initiated anonymously.
3. Define the name to be associated with the new connection. This is the name that will appear
on the PC's net directory. Just select it from the list to start the connection.
For example:
FAGOR_CNC
Connection with a shared CNC with password
1. First, select the network site, in this case an ftp folder. Write "
ftp://
" followed by the CNC's
IP address defined by machine parameter DIRIP (P24).
For example:
ftp://10.0.17.62
2. Define the user name and how the session is initiated, anonymously or not. When the CNC is
shared with password, the session is not initiated anonymously. The user must identify itself and
it must be as "
cnc
" or "
CNC
".
3. Define the name to be associated with the new connection. This is the name that will appear
on the PC's net directory. Just select it from the list to start the connection.
For example:
FAGOR_CNC
After the configuration is done and every time the connection is made, a window will open requesting
the user name and password. As user name, select "
cnc
" or "
CNC
" and as password the one defined
by machine parameter CNHDPAS1 (P7).
To make it easier, the –Save password– option may be selected in this window. This way, it will no
longer request the password when connecting again and it will access the hard disk directly.
10.0.7.40 CNC_1
10.1.6.25 MILL_MACH_01
On the Iexplorer browser, it is called "Favorites". This name may vary depending on the Web browser
being used.
i