Page 2/9
Installation
2.2
Requirements
To connect the VISY-Input 8 to the VISY-X system an interface card of version VI 4 or higher
must be installed and connected to the communication adapter VISY-ICI 485.
2.3
Installation
The VISY-Input 8 is designed for wall mounting inside a building.
For mounting the casing cover must be removed.
2.4
Design and construction
The following figure shows the position of the connectors, LEDs and controls on the board of
the VISY-Input 8.
Figure 1: VISY-Input 8 Design
2.4.1
Device information
(1)
Label with the serial number which uniquely identifies the device. When doing the
configuration using VISY-Setup this serial number has to be entered to address the
device.
1
6
3
2
4
5
8
7
9
10
11
12
13
Ser.
no.
Содержание VISY-Input 8
Страница 11: ......
