fadini Siti 63, Инструкция по эксплуатации, Страница: 42 / 48

page 40
system
230 V
50Hz
Recharger
9V a 300mA
Birio LC Device with its own internal batter y has 6 hours autonomy, when the batter y needs to be recharged the letters
"b L" = "batter y low" are displayed, then all leds will start to flash.
Plug-in the batter y recharger and recharge for about 5 hours. NOTE: the batter y recharger is not supplied with the Device.
When buying one make sure it is suitable with the batteries technical data.
Plug in the batter y recharger as soon as the Display dims so that you can work with the Device supplied by the mains.
Birio LC
BATTERY RECHARGE
LOW
BATTERY
DISPLAY
4213
ADDING A TRANSMITTER TO THE MEMORY
1°
Connect
Click
3°
- Turn on the Birio LC Device and open the file
-Click on connect
-Click on Add Transmitter
- Fill in the Code Number of the new Transmitter (see page 32
on how to download the transmitter's data and the code) then
fill in the general information
page 38
This operation allows to add a new transmitter to the Memory file, and then store it without unplugging the Memory from the Radio Receiver .
nr position
Add a
transmitter
Delete a
transmitter
2
- To activate the new transmitter get it near the Radio Receiver (max distance
10 metres) and push any button for 5 times: when the led will turn on the new
transmitter is activated on the Radio Receiver.
N.W: After this operation it is necessary to pay attention should you need to read the Memory data on the PC (with the operation Memory data
downloading on PC, page 31) because when the file is closed, all the information entered by the the user will be overwritten and thus deleted, as it is
not possible to write and store the Customer's General Information on the Memory.
AERIAL
1
2
3
4
5
1°R
2°R
B
A
B
2°
- Follow Transmitter Copying operaton (page 38 starting from 2nd phase)
entering the code of a key-encoded Transmitter into Memory, this will allow the
new Transmitter to enter Memory.
Find
Customer
Find
Code
Entered or searched code(0,1,...F)
00 12 2F
Enter code
for copy
Click
Code number
<< Previous Following >>
00 E6 69
Siti