fadini Elpro 43, Руководство пользователя, Страница: 12 / 32

ELECTRONIC CONTROLLER FOR DARDO 430 GATE OPERATOR
ON DOUBLE SWINGING GATES
Elpro 43
GB
12
Bridge B1 with B2 and carry on
programming
excluding delay
mode on gate leaves .
PC Board
power supply
F N
Control board power supply
230 V - 50 Hz
g
round
Trimmer Force during slowdown :
it controls the maximum force that Dardo
applies to the gate during slwdown phase
and in proportion the resistance on obstacle
contact.
The new setting of force will be performed
on the next open/close/radio command
-
+
-
+
-
+
24 Vdc max 50 mA
relay output or
courtesy light
D1 E1 F1 D2 E2
Motor power supply
Dwell trimmer:
from 1 s to 120 s
Trimmer Force during travel :
it controls the maximum force that Dardo
applies to the gate during travel and in
proportion the resistance on obstacle
contact.
The new setting of force will be performed
on the next open/close/radio command
ENCODER
M1
ENCODER
M2
M1 = Dardo on the 1
st
gate leaf to open and being also the
pedestrian one, if required
M2 = Dardo on the gate leaf delayed on opening.
INSTALLATION ON A SINGLE GATE
M1 = this output is to be used for Dardo on a single mount
Motor power supply
ENCODER
M1
F2
!
D1 E1 F1 D2 E2 F2
M2 M1
A1 C1 B1 A2 C2 B2
com. com.
F.T.
F.S.
M1
A1 C1 B1
com.
Accessory Electrical connections
Dip-switches and LED indication
of the various functions