fadini Elpro 43, Руководство пользователя, Страница: 11 / 32

ELECTRONIC CONTROLLER FOR DARDO 430 GATE OPERATOR
ON DOUBLE SWINGING GATES
Elpro 43
GB
11
24 Vdc output
max. load 500 mA:
n° 1 radio receiver
n° 2 pairs of photocells
n° 1 led Chis 37/Chis-E 37 or DGT 61 PCB
Input for
pedestrian
opening
12 Vdc output
for the electric lock
+
-
ON: pre-flashing before opening
OFF: no pre-flashing
ON: DSA control enabled on photocells.
It is necessarily required that the photocells
projectors be power supplied to 11-12 terminals
OFF: no DSA control on the photocells
ON: flasher disabled in dwell time on automatic
mode of operation ( Dip 3 = ON )
OFF: it flashes in dwell time
on automatic mode of operation ( Dip 3 = ON )
DIP-SWITCHES N° 4 and 8:
DIP-SWITCH N° 10:
4
10
8
24 V - max 500 mA output
230 Vac flasher
24 Vdc output
for DSA control
Input for pedestrian
opening
(M1 motor only)
Electric lock output
12 Vdc
Photocells projectors
VIX 53
common
L13 green ON = safety edge in opening.
It goes OFF whenever the safety edge is
activated
L14 green ON = safety edge in closing.
It goes OFF whenever the safety edge is
activated
M1
In series if
NC mechanical type
In series if
NC mechanical type
In parallel if
8,2 kΩ resistive type
In parallel if
8,2 kΩ resistive type
Input for
safety edge
in opening
Input for
safety edge
in closing
ON: stroke reversing pulse enabled for 2 s
in opening
OFF: stroke reversing pulse disabled
DIP-SWITCH N° 7:
7
Accessory Electrical connections
Dip-switches and LED indication
of the various functions
9 10
24 V output to power supply the projectors of the
photocells (power supplied in parallel) on
DSA control:
D evice for S afety A utotest = before gate operation,
provided that this function is enabled. All of the safety
devices are tested and assessed to be free from any
obstraction, otherwise the operator is not allowed to
start.
230 Vac OUTPUT for the flasher
19 20
11 12
common common
NC
NC
8,2 kΩ
13 15 13 15
common
NC
NC
common
8,2 kΩ
14 15 14 15
15 16
17 18