INSTALLATION OF THE ANCHORING PLATES FOR TWO BARRIERS
Important:
At the moment of the attachment of the housing
cabinet on top of the anchor plate, it is necessary to pay
attention to the insertion of the electrical cable conduit as
well, having it pass inside of the two holes in the base of
the housing cabinet.
B
3
5
6
4
3
A
BAYT 980
Oleodinamica
80 mm
IMPORTANT
DIMENSION
4
13
5
5
11
6
12
10
7
8
9
2
1.
One pair of Fit 55 photocells
2.
Fixed pedestal with yoke
3.
Anchor bolts
4.
0.54 m Column
5.
0.30 x 0.30 x 0.20 m Concrete
block for photocell
6.
Important dimension 80 mm
7.
ø20 mm flex conduit for
connection of cabling for fixed
pedestal with yoke for the
electromagnet
8.
ø20 mm flex conduit for
photocell connection cabling
9.
Derivation well
10.
ø50 mm flex conduit for barrier
and accessories connection
cabling
11.
0.5 x 0.5 x 0.6 m
Concrete block
12.
ø50 mm flex conduit for
electrical power supply cabling
13.
0.304 x 0.354 m Anchor plate
For the installation of the
"Fixed pedestal with yoke"
- 2 - it is necessary to arrange a service conduit for the passage of electrical cabling for the
photocells or for a possible application of the electromagnet (optional) anchoring the "Aluminium Barrier Beam" between the barrier and the fixed
pedestal with yoke - 2 -; this operation must be performed after having set the Bayt 980 foundation plate at a distance determined by the length of
the barrier beam from the fixed pedestal - 2 - 80 mm out of line from the corner of the housing cabinet base (Fig. 5).
Once the
Anchor Plate
Anchor Plate has been well set in the ground (it is necessary to wait until the concrete has set), the Bayt 980
housing cabinet
may be installed and then tighten the four
M14 hexagonal nuts
securely with their relative
washers
(screwing them down tight on the anchor bolts
extruding from the base of the cabinet) as illustrated in Fig. 6.
1.
Right handed -
RH
- Bayt 980
Hydraulic Barrier
(seen from outside)
2.
Left handed -
LH
- Bayt 980
Hydraulic Barrier
(seen from outside)
3.
Anchor plate 304 x 354mm
4.
ø50mm conduit for connection
of cabling between the two
barriers
5.
M14 anchor bolts - 4 pcs.
for each barrier
6.
ø50mm conduit for service
cabling
1
5
2
RH
LH
FIG. 4
INSTALLATION OF THE FIXED PEDESTAL WITH YOKE
View from the door
side inside property
!
Tighten the four M 14
hexagonal nuts with
the washers supplied
A
LH
FIG. 6
3
1
1
4
For installations that require two Bayt 980 roadway barriers it is necessary to arrange underground electrical conduit for communication
between the two housing cabinets, for the connection of the photocells or other accessories for the service cabling (Fig. 4).
FIG. 5
Version
A
RH
M14
Housing
cabinet
!
Insert the conduit inside
of the cabinet passing
by way of the two holes
in the anchor plate.
!
Bayt 980
page
4
Made in Italy
the gate opener