ADJUSTING SQUEEGEE
1. TURNING ADJUSTMENT KNOB CLOCK-WISE
(TIGHTENING) WILL RAISE TIPS & LOWER CENTER.
(SEE FIGURE 14.)
FIGURE 15.
FIGURE 16.
FIGURE 17.
ADJUSTING CASTERS
1. CASTERS DETERMINE THE RIDE HEIGHT & AMOUNT
OF BLADE DEFLECTION. NOTE:DIFFERENT SQUEEGEE
MATERIALS (GUM, LINATEX,NEOPRENE) MAY REQUIRE
DIFFERENT RIDE HEIGHTS.
(SEE FIGURE 18.)
FIGURE 20.
3. ADJUSTING BOLT: LOWERING CASTER REDUCES
DEFLECTION. RAISING CASTER INCREASES
DEFLECTION.
(SEE FIGURE 20.)
2.
TO ADJUST CASTERS LOOSEN LOCKING NUT
(SEE FIGURE 19.)
FIGURE 18.
FIGURE 14.
2. THIS SQUEEGEE IS ADJUSTED TOO FAR BACK AND WILL
NOT PICK UP ON THE CORNERS.
*NOTE TIPS OFF THE FLOOR.
(SEE FIGURE 15.)
3. THIS SQUEEGEE IS ADJUSTED TOO FAR FORWARD
AND WILL NOT PICK UP IN THE CENTER.
*NOTE CENTER SPACED OFF THE FLOOR.
(SEE FIGURE 16.)
4. THIS SQUEEGEE IS ADJUSTED JUST RIGHT WITH GOOD
DEFLECTION ACROSS THE ENTIRE REAR BLADE
(SEE FIGURE 17.)
FIGURE 19.
4. SINGLE VAC SQUEEGEE BLADE
(9 SLOTS)
(PART # 390-755)
(SEE FIGURE 21.)
FIGURE 21.
FIGURE 22.
5. DUAL VAC SQUEEGEE BLADE
(15 SLOTS)
(PART #390-756)
(SEE FIGURE 22.)
PAGE 11
