FactoryCat 2023, Руководство пользователя

Страница: 13 / 72

PAGE 11
***
FOR CORRECT PAD APPLICATION , CALL YOUR LOCAL DEALER
***
1. TURN ON MACHINE POWER.
2. RAISE THE SCRUB DECK BY DEPRESSING THE
BRUSH SWITCH (-) TO THE UP AND OFF POSITION
AND TURN MACHINE POWER BACK OFF.
3. THE MACHINE IS EQUIPPED WITH A SHROUD.
UNSCREW THE TWO KNOBS ON TOP OF THE
SCRUB DECK AND REMOVE THE SHROUD.
(SEE FIGURE 9.)
7. WITH BRUSHES LOCKED IN PLACE, REPLACE SHROUD
AND TIGHTEN THE TWO KNOBS ON TOP OF THE SHROUD.
(SEE FIGURE 12.)
FIGURE 10.
4. SELECT THE CORRECT PADS OR BRUSHES THAT
BEST MEET YOUR CLEANING APPLICATION.
CONSULT YOUR LOCAL DEALER FOR ASSISTANCE.
5.
PAD INSTALATION: ATTACH PADS TO PAD
DRIVERS BEFOR CONNECTING DRIVERS TO
MOTOR HUB. CENTER CLIP SHOULD CLICK TWICE.
(SEE FIGURE 10.)
FIGURE 11.
FIGURE 9.
6.
ATTACH BRUSHES OR PADS TO MOTOR HUBS.
SQUEEZE THE SCISSOR LOCKING DEVICE AND LIFT
BRUSH UP ON TO THE MOTOR DRIVE HUB. MAKE
SURE THE SCISSORS CLOSE AND LOCK ONCE THE
BRUSHES ARE ON.
(SEE FIGURE 11.)
FIGURE 12.
INSTALLING PAD DRIVER OR BRUSH