![background image](http://html1.mh-extra.com/html/factory-furniture/tord-wall-bench-and-seat/tord-wall-bench-and-seat_operation-and-maintenance-manual_3176671002.webp)
&
5HVSRQVLEOH
)RUHVW0DQDJHPHQW
Introduction
Design
Design, shop drawings and development by Factory Furniture Ltd.
Manufacture
Factory Furniture manufactured components. Products are assembled in Factory workshops, checked and
dispatched ready for installation. Replacement products or components thereof should be ordered direct from
Factory Furniture Ltd.
Copyright
The design copyright for the product and drawing copyright remains the sole property of Factory Furniture Ltd.
General Specifications
Bench (Wall)
Metric
L 2300mm | W 475mm | H 230mm *
Imperial
length 7’ 6½” | width 1’ 6½” | height 9” *
* Recommended seat height - 450mm (1‘ 5½”)
Approx Weight
67kg
Fixing Centres
1800mm (5’ 11”) x 185mm (7½”)
Seat (Wall)
(with back and armrests)
Metric
L 2300mm | W 595mm | H 585mm *
Imperial
length 7’ 6½” | width 1’ 11½” | height 1’ 11” *
* Recommended seat height - 450mm (1‘ 5½”)
Approx Weight
109kg
Fixing Centres
1800mm (5’ 11”) x 185mm (
7½
”)
Detailed Material & Finish Specifications
Seat Slats
(Also Backrest slats - TORD wall seats only)
• Manufactured from FSC® certified tropical hardwood
• Slats are profiled and left untreated as standard (oil or microporous woodstain treatment
available on request)
• Slats screwed to bench / seat frame (4 no. fixing points per slat)
Frame Assembly
• Manufactured from mild steel
(all welded construction)
. Frame is hot dip galvanised
• 2 off frame assemblies per bench / seat
• Anchored to base through frame using M10 x 30mm button head bolts:
- For ‘Wall’ version these bolt into M10x125mm stainless steel anchor inserts resin fixed into wall / plinth*
(
4 no. per bench / seat)
- For ‘Gabion’ version these bolt directly into gabion base (4 no. per bench / seat)
*
Please note: Wall / plinth is not included as standard - supplied by others
Gabion Base
(Gabion versions only)
• Manufactured from mild steel RSA and 75x75mm aperture Ø5mm wire mesh. All welded construction and
hot dip galvanised finish
• Anchored to ground using 4 off M10 x 75mm sleeve anchors
• Please note: Gabion infill stone is not included as standard
- supplied by others
General Maintenance
(Recommended Schedule & Guidelines)
Daily/Weekly/Monthly
(or as adopted)
Visual checks of bench / seat top, back and frame - check all items for superficial or physical damage.
Three Monthly
Clean all items as detailed below check all fixings are seated correctly; inspect timber for serious damage and
splinters.
Six Monthly
Secure all fixings; full clean as detailed below; check that bench / seat is firmly secured to the plinth / wall or
gabion
2
TORD WALL specification
Bench (Gabion)
Metric
L 2300mm | W 475mm | H 450mm
Imperial
length 7’ 6½” | width 1’ 6½” | height 1’ 5½”
Approx Weight
132kg
Fixing Centres
1500mm (4’ 11”) x 335mm (1‘ 1”)
Seat (Gabion)
(with back and armrests)
Metric
L 2300mm | W 595mm | H 805mm
Imperial
length 7’ 6½” | width 1’ 11½” | height 2’ 7½”
Approx Weight
174kg
Fixing Centres
1500mm (4’ 11”) x 335mm (1‘ 1”)