③
Set IP address, not editable when Auto IP mode is
selected. Note: The last IP BYTE’s
range is 2-252.
④
Matrix device MAC address
⑤
Click OK to set the configuration. If the configuration is set OK, the Matrix will be searched
out again
⑥
Click to Close the window and the configuration will cancel.
“Port Tag” page
①
Input port tags
②
Click to edit Input port tags
③
Output port tags
④
Click to edit Output port tags
NOTE
:
1. Edit boxes are read only, click the
“Edit” button to edit the tags.
2. One set of Input/output port tags can be set for the Matrix when the COM control mode is
selected.
3. Input/output port tags can be set for respective Matrix connected devices according to a
devices MAC address.
Edit Input port tags
After the action
②
,an edit form will pop-up as below:
4
2
3
1
