7
www.factorelectronics.com
HDBaseT-4x4Matrix
Factor Electronics
OUT5
OUT5=Copy OUTPUT5 EDID to INPUTx
OUT6
OUT6=Copy OUTPUT6 EDID to INPUTx
OUT7
OUT7=Copy OUTPUT7 EDID to INPUTx
OUT8
OUT8=Copy OUTPUT8 EDID to INPUTx
8. Up selection button--- Press to change a
segment’s value.
9. ESC---Press to quit EDID set mode.
10. Lock LED indicator---Indicates the status of Lock.
11. Lock button---Press to lock the buttons of the front panel.
12. HDMI input selection button 1 to 4---Press to select the inputs from 1 to 4.
13. PTP button---Press to mirror all inputs and outputs (e.g. output 1 to input1, output 2 to
input2 and so on).
14. Selection button---Press to select a segment to change settings. The selected segment will
be blinking.
15. Down select button---Press
to change segment’s value.
16. Enter button--- Press to set the EDID to a specified INPUT or copy the EDID from a
specified OUTPUT to a specified INPUT.
Back Panel
1. GND---Connect to ground if necessary.
2. IR inputs 1 to 4--- 3.5mm stereo phone-jack, connect to an IR receiver
3. IR outputs 1 to 4 --- 3.5mm mono phone-jack, connect to an IR transmitter cable.
4. RS232 port with each HDBT out--- Connect to a PC, RS232 extension to the Balun.
