Facilities Resource Group Standard Series, Руководство по установке

Страница: 33 / 61

32
TTS-S-IM V2 09.22
Remote Controller
•
The TTS-S comes with a remote controller (RC-9018M) that must be installed into unit #1. Refer to the
schematic on pg. 58 of this manual for instructions on locating unit #1.
•
Refer to directions below or pg. 45 of the Water Heater Installation Manual for description on installing
the remote controller
•
The remote controller can be mounted adjacent to the TTS-S utilizing the provided cord, or extended
utilizing 18 AWG wire up to 300 ft. Refer to the Water Heater Installation Manual for additional
mounting instructions.
•
Only one remote controller is connected to the Noritz tankless water heater to monitor and control all
the units. If two or more remote controllers are connected a malfunction will occur.
•
When power is first connected to the m the remote enters an intial setting mode where you will be
prompted to choose between a system type (Standard, Recirc., or Tank Recirc.).
•
If “Recirc” is selected, properly set the recirculation system operation timer
(Ex. 5:00am – 8:00am).
•
Refer to the RC -9018M (Remote Controller) Installation Manual for additional information such as
system clock button (pg. 8), setting hot water temperature (pg. 10), locking (pg. 14), additional settings
(pg. 15), and disabling recirculation operation (pg. 18).