18
Appendix B – Upgrading R680/H680 Firmware
This Appendix describes how update the firmware of the R680/H680 HBA should that be
necessary. The latest firmware can be found in the Firmware directory of the supplied
USB Key or at
http://www.attotech.com/
.
Launch the ATTO Configuration Tool. Select the R680/H680 HBA in the left pane. Next
select the “Flash” tab to the right. Browse to the current flash. Choose “Update”.
Before rebooting, select the HBA on the left and turndown the “+”. Select Channel 1.
Next select the NVRAM tab on the right. Verify the settings are as follows. If not, adjust
accordingly before rebooting.
