15
Appendix A – Recreating the disk set (Direct
Attached use only)
This Appendix describes how to recreate the disk set should that be necessary. This will
destroy any data present on the drives. This process takes approximately
8 hours.
Launch the ATTO Configuration Tool. Go to the RAID tab and select “Custom RAID”;
Click OK.
Input the Options shown below (Name, Level, Interleave and Initialize) and click Next.
Note: The Name will be TX16Raid if using the 16 drive chassis.
Create a new RAID group by highlighting all of the drives in the upper window and
dragging to lower window. Click Next.