Fac C3, Руководство по эксплуатации и обслуживанию

Страница: 34 / 45

32
EN
DECOMMISSIONING THE CUTTER
11
.1 - Correct procedure
A machine compromises:
• Aluminium-alloy frame.
• Stainless-steel inserts and components.
• Electrical parts and electrical cables.
• Electrical motor
• Plastics, etc.
- When commissioning third parties to perform dismantling and demolition, only
businesses authorised to dispose of these materials should be employed.
- When demolishing without outside assistance, sort the various types of material and
hand over to authorised businesses for disposal..
ALWAYS comply with the current legislation of the country in which the
slicer is utilised.
☞
CAUTION: ALWAYS consult the manufacturer or after-sales
assistance staff authorised by the former in order to remove the
blades and dispose of the same, so that this can be performed
without constituting a hazard.
DO NOT ABANDON SCRAPS AS THEY ARE A SERIOUS
DANGER FOR PEOPLE, ESPECIALLY CHILDREN, AND
ANIMALS.
--------------------------
Refer to the “Instructions for treatment at the end of life” on page 12.