Fac 2 F250 TC-V, Руководство по эксплуатации и обслуживанию

Страница: 42 / 56

40
EN
PROBLEM CAUSES SOLUTION
Pressing the green or
white button the machine
starts, but will not turn the
operation light on. Defective indicator. Do not use the machine with
light indicator off; consult
promptly the customer
service.
The machine starts but
vibrates, the motor is very
hot and there is bad smell. Defective motor or
transmission. Do not use the machine,
consult promptly the
customer service.
The machine under load
slows or stops. Defective transmission. Consult the customer
service.
Excessive resistance at
cutting of the product. The blade is blunt. Sharpen the blade.
The slices are ragged
and/or irregularly shaped. The blade is blunt. Sharpen the blade.
Blade excessively worn. Consult the customer
service.
The blade sharpening is
unsatisfactory. Worn wheels. Replace the wheels; Call
the customer service.
The product tray does not
slide. Insufficient guides
lubrication. Lubricate.
Pressing the black or red
button the machine does
not stop. Defective electrical control
circuit. Stop the machine pulling
the plug from the network
and call customer service.
USER NOTE
This publication shall consist of n°64 pages as specified below:
• Title page with Notes for the User (no print back);
• Index of contents, pag. 3;
• From pag. 3 to pag. 59: progressive numeration.
The manufacturer reserves its right to bring changes to the information indicated in the manual
without the obligation to communicate it in advance, as long as they don’t alter safety.