Fabyka FA Series, Руководство по установке и инструкция пользователя

Страница: 12 / 20

Page
Installation
(Continued)
Upper chimney
Wall mount
range hood
Lower chimney
8” Round duct (exhaust)
Air Movement Direction
Note:
Type “A” anchors are designed
for dry wall. Not to be used with any
other types of walls.
Calculate
the height of the duct tube and extend approximately 6” (15 cm) longer than required, connect the
lower end of the duct tube to the range hood and the upper end to the vent system. Make sure the main electri -
cal supply remains disconnected then connect power plug to the electrical cord or wall plug.
Have one person carefully position both upper and lower chimneys on the range hood, let the second person
slide the sides of the chimneys into the 1/8” gap. Fasten both chimneys with four Type “C” screws.
Install grease cup and aluminum filters then check the operation of the range hood.
8.
9.
0.
Installation Overview
Mounting Bracket
For sheet rock only
A B
C
A B
C