Photo of Driver’s side
Photo of Driver’s side
Photo of Driver’s side
25.
Use a drill with a long ¼” drill bit, drill the two holes on
the outside of the frame completely through the frame.
IT
IS VERY IMPORTANT TO DRILL THESE HOLES
STRAIGHT!!
Follow with a 7/16” drill bit completely
through both sides of the frame. Using a 5/8” drill bit,
ONLY
drill the outer hole out to 5/8”.
USE CARE
WHEN DRILLING THROUGH THE FRAME AS
THERE ARE FUEL LINES AND ELECTRICAL ON
THE BACKSIDE OF THE FRAME, USE CARE NOT
TO DRILL INTO THEM.
SEE PHOTOS
BELOW AND
ON NEXT PAGE
Front of Jeep
Install bolt
as shown
here
Front of Jeep
