(B) BOTH CHAINS ON THE INSIDE POSTS
(A) BOTH CHAINS ON THE OUTSIDE POSTS
(this results in less clicking as the
chain rotates over the guard)
Top end of
the fascia
Snapped
into place
(D) CHAINS TOWARDS THE BACK
(chain is less visible)
(C) CHAINS TOWARDS THE FRONT
(best for applications with side channels)
SSS1606LSFII
© 2016 Fabritec, LLC. All rights reserved.
Snap end cap cover into place
Insert end cap cover
EST
. 19
73
EST
. 19
73
STEP 5 - DECIDE ON THE CHAIN POSITION.
See the 4 chain position options (illustrations A to D below.
STEP 6 - SNAP ON THE FASCIA.
Catch the top end of the fascia on the top of the bracket
and simply snap into place.
STEP 7 - ADD THE END CAPS FOR A FINISHED LOOK.
Note: The end caps cannot be used on an inside mount
installation.
STEP 8 - INSTALL THE P-CLIP (HOLDDOWN).
Depress the p-clip holddown and firmly attach to the wall.
DO NOT PULL THE BEAD CHAIN TAUT, as this will prevent the
bead chain from operating smoothly.
Caring for your L-System Fascias & Roller
shades
Your fascias and roller shades will provide you with years of
beauty and pleasure with minimal care and cleaning.
• Vacuum using a brush or dust head attachment.
• Dust lightly using a soft, clean cloth.
• Never immerse the fascias or shades in water or liquids of
any type.
Call us at
800.828.2500
if you have any questions.
P-clip installed
