Heating System
The heating element of this unit can be set to heat the paraffin wax to
between 125°F - 138°F (51.5°C - 58.9°C). When wax reaches the set
temperature, heating unit will turn on and off to keep wax at proper
temperature level. The temperature indicator light will flash when heating
coil is warming wax. The high-heat safety shut off will activate if the
paraffin wax temperature reaches 150°F (65.6°C).
Symbols on the Wax Temperature Display Readout:
HEAT
- unit is in the initial wax-melt phase -
DO NOT USE
HOT
- unit is not in initial wax-melt phase, but is greater than 3°F
(1.7°C ) above set temperature -
DO NOT USE
E000 - unit overheated -
DO NOT USE
E001 - other error -
DO NOT USE
For both E000 and E001 errors, turn unit off and unplug for 30 minutes
and try again. If unit still does not turn on replace the two (2) fuses
(F3AL250V). Fuse box is on underside of unit. Turn back on. If error
persists the unit has failed and requires repair.
Unit
Displays wax temperature
when wax temperature is less than 3°F
(1.7°C ) greater than set wax temperature.
For Hands, Feet and Elbows
To extend heat therapy, after dipping place your hand, foot or
elbow into a plastic liner and cover with terry cloth mitt for 15
minutes.
1.
Remove all jewelry, and wash and
dry area to be treated thoroughly.
2.
Remove lid from the WaxWel®
Plus Adjustable Paraffin Bath unit and
carefully test the temperature of the
wax on the inside of your wrist.
3.
Spread your fingers or toes apart
and slowly immerse your hand, foot,
or elbow into paraffin wax making sure not to splatter the hot wax.
Then gently remove your hand, foot, or elbow from the heat, and wait
approximately 3 seconds for the paraffin to set.
4
