Adjustable paraffin bath features include:
•
Ergonomical design with rounded edges for patient comfort
•
Surface remains cool to touch due to energy efficient design
•
Outer shell made from durable ABS plastic
•
Holds up to 6 lb (2.7 kg) of paraffin wax
•
Unit accommodates up to USA 12½
(
European 47) men’s shoe size
Additional features include:
•
Wax temperature adjustable between 125°F-138°F (51.5°C-58.9°C)
•
Digital readout shows actual paraffin temperature
•
Cover has safety lock to prevent hot wax spills
•
High-heat safety shutoff set at 150°F (65.6°C)
•
Can be used with timer (sold separately) to start and stop unit auto-
matically
•
One unit for both 110V and 220V. Unit automatically senses proper
power setting.
Operating Steps
Filling the WaxWel® Plus Adjustable Paraffin Bath
1.
Remove the lid, plastic safety grate, all plastic and paper wrapping,
paraffin, as well as all literature in the unit. The paraffin wax beads/pel-
lets or blocks are packaged in 1 lb (.45 kg) bags.
2.
Make sure the unit is on a level, flat, heat resistant surface.
3.
Open and empty contents of 4 bags of paraffin wax into the unit (break
blocks if necesssary), add remaining wax when these have melted (see
steps 4-5 to melt).
4.
Turn unit on using the green toggle switch located on the front. The on
position is indicated by the illuminating light. Set temperature to 138° to
melt wax at fastest rate.
5.
Place and lock the lid on the unit to retain heat. It will take approxi-
mately 10-20 minutes for the wax to begin to melt. The total amount of
time to melt six (6) lb (2.7 kg) of wax is approximately 2 hours.
6.
Insert safety grate. This will sink to the bottom of the tank to protect
user from touching the bottom of the tank.
7.
Once wax is fully melted, adjust “set temperature” to desired tempera-
ture for use.
8.
When actual temperature reads set temperature, unit is ready for use.
3
