Version 1.1
FP8100 Series User’s Quick Reference
Page 2/3
www.fabiatech.com
©2009-2010 FabiaTech Corporation
B. I/O Connectors Group #2 (LAN, COM1, VGA, and Audio)
6. Installation
A. Installing the Wall Mount Kit and Panel Stand Kit
B. Open the Cover for installing 2.5” HDD, CompactFlash, DDR RAM, WLAN, and Antenna
C. Installing DDR, HDD, CF, mini Card, SIM, Antenna, and Battery (RTC & CMOS Ram)
COM1
LAN
Note : The LAN port is a RJ45 connector with 2 LEDs. The orange LED indicates data is accessing
and the green LED indicates on-line status.
VGA (D-sub 15)
Earphone
(Line-Out)
Mic-In
DD
R
SO
DI
MM
DD
R
SO
DI
MM
CF
FB6604 CPU
Board
Install DDR RAM Module
4 screws
Wall Mounting Kit (4 Screws)
Also including VESA 75mm Standard
Panel Stand Kit (4 Screws)
FP8100K1 (optional)
Step 1: Separate the back cover
from housing (10 screws)
Step 2: Separate the I/O cover
from housing (9 screws)
Step 3: Remove FB6604
CPU board (2 screws)
Install mini Card Module (1/2)
Install the Antenna
Install the SIM Card (1/3)
Install mini Card Module (2/2)
Install the CompactFlash Module
Install the 2.5” HDD (1/2)
Install the 2.5” HDD (2/2)
Install the SIM Card (2/3)
Install the SIM Card (3/3)
2 screws
Install the Battery (2 screws)
2 screws
