FabiaTech Fanless Series FX5403 Скачать руководство пользователя страница 12

Страница: 12 / 66

FabiaTech Corporation

Packing List

Upon receiving the package, verify the following things. Should any of the

mentioned happens, contact us for immediate service.

•

Unpack and inspect the FX5403 package for possible damage that may

occur during the delivery process.

•

Verify the accessories in the package according to the packing list and see
if there is anything missing or incorrect package is included.

•

If the cable(s) you use to install the FX5403 is not supplied from us, please

make sure the specification of the cable(s) is compatible with the FX5403
system.

Note: after you install the FX5403, it is recommended that you keep the diskette or

CD that contains drivers and document files, and keep the document

copies, or unused cables in the carton for future use.

The following lists the accessories that may be included in your FX5403 package.

Some accessories are optional items that are only shipped upon order.

•

One FX5403 embedded system.

•

One AC to DC power adapter and one AC power code.

•

One 44-pin flat cable and 4 screws for fixing and connecting a 2.5" HDD
driver.

•

One Y-type (3-terminal) PS/2 keyboard plus mouse port adapter cable.

•

Two L-type universal fixers and 6 screws.

•

One 2-pin apartable terminal block.

•

One compact disc includes software utility.

Содержание Fanless Series FX5403



































































Результаты поиска

Содержание Fanless Series FX5403

Отзывы:

Похожие инструкции для Fanless Series FX5403

Бренды по названию

Популярные бренды

FabiaTech Fanless Series FX5403, Руководство пользователя

Результаты поиска

Содержание Fanless Series FX5403

Отзывы:

Похожие инструкции для Fanless Series FX5403

Бренды по названию

Популярные бренды