UK/IRL
37
UK/IRL
36
Once gas is available at the pilot, continued rotation anti-clockwise
will cause the piezo igniter to spark. This is accompanied by a click
at the valve and should result in the pilot burner igniting.
Once the pilot is lit, the control knob should be held pressed in for
10 seconds. In this time the pilot flame will have heated the flame
supervision thermocouple sufficiently to operate a hold-on magnet
within the valve.
Now turn the control knob A to the
position. This allows gas to
enter control knob B.
Knob B
The
{
is the OFF position preventing gas entering the main burner if
the pilot is lit.
The knob should be turned slowly anticlockwise. This allows gas to
enter the burner and be ignited by the pilot flame. Once ignition has
taken place, the fire may be set to any level between min. and max. by
adjusting the control knob B.
10.2 To light
1.
Push in and turn the control knob (A) from
{
anticlockwise to
the setting
(small flame). You will hear a ignition click. Check
that the pilot is lit (if not repeat).
2. Continue to hold in the control knob for a further ten seconds to
ensure that the pilot flame is stable.
3. Release the knob. The pilot should remain alight.
4. Turn the control knob A to the
position.
5. Turn knob B slowly anticlockwise, the fire should then ignite.
6. Adjust flames to the required level.
10. CONTROLLING THE APPLIANCE
10.1 Lighting the fire
If the main burner or pilot light are extinguished for any reason, d
do
o
n
no
ott a
atttte
em
mp
ptt tto
o rre
elliig
gh
htt tth
he
e p
piillo
ott w
wiitth
hiin
n 5
5 m
miin
nu
utte
es
s.. Contact a qualified
installer when the appliance goes off regularly.
The gas valve is behind the ashtray door, open by pulling down.
With control button A you can light the pilot. With the control button
B you can adjust the height of the flames (see fig. 15).
Knob A
The
{
is the OFF position preventing any gas from passing through the
control valve to either the pilot burner or to the main burner. By
pressing the knob in it is possible to turn it anticlockwise. The first
function is to turn on the gas to the pilot- this occurs just before
reaching the
|
position (if the fire has not been lit for some time it may
be necessary to hold the knob in this position for some seconds to
clear the air from the pipe and allow gas to reach the pilot burner).
fig. 15
gas valve
A
B
Содержание VICO
Страница 18: ...UK IRL 33 USER GUIDE UK IRL 32 ...
Страница 24: ......