EN
12
џ
·Connect the hood to the mains through a two-pole switch ensuring the
having the contact gap of at least 3 mm.
Remove the grease filters (refer to the Maintenance paragraph) being sure
that the connector of the feeding cable plug is correctly inserted into the
hood socket.
џ
џ
џ
џ
·Fit the set of two telescopic air duct casings onto the hood.
·On the lower casing there are special tabs that need to be pointed to the
slots located on the hood top panel.
·Fix the lower air duct casing on the top hood panel with two 3,5x11
mm thread cutting screws.
Carefully push forward the upper air duct casing, hang it onto the
brackets and secure with 3,5x11 mm thread cutting screws.
Electrical Connection
Air duct casing installation
CZ
46
PIXEL 60
PIXEL 90
Rozměry
