10
16.49 in 419 mm
15.82 in. 402 mm
15.00 in. 381 mm
5.79 in.
147 mm
4.34 in.
110 mm
NIGHT 13
50.31 in [1278 mm]
NIGHT 19
74.31 in [1887 mm
NIGHT 25
100.31 in [2548 mm]
NIGHT 13
51.41 in [1306 mm]
NIGHT 19
75.41 in [1941 mm]
NIGHT 25
101.41 in [2576 mm]
PREPARATION FOR SERVICE
!
NOTE:
All components are replaceable from the front
of the fireplace while the unit is mounted in the wall.
Tools Required:
Philips head screwdriver
WARNING:
Disconnect power before attempting any
maintenance or cleaning to reduce the risk of electric
shock or damage to persons.
CAUTION:
If unit was operating prior to servicing allow
at least 10 minutes for lights and heating elements to cool
off to avoid accidental burning of skin.
!
NOTE:
All instructions are created for replacement
of the XLF50 components and as a result the number
of screws may differ for the
NIGHT 19
and
NIGHT 25
.
1.
Turn the breaker off at the electrical panel.
2. Remove the front glass assembly by removing the 2
screws (1 on the left and 1 on the right side, located
just inside the top front vent opening). These screws
secure the front glass panel to the inside of the fire-
place. (Figure 4)
3. Lift the front glass assembly out of the unit and care-
fully place the glass assembly aside in a safe location.
4. Remove the decorative acrylic ember-bed pieces from
the media tray, which lies along the bottom of the inter-
ior Partially Reflective Glass. A medium sized container
such as a bucket or a box will be needed to keep the
acrylic ember-bed pieces together.
5. Attach the suction cup to the partially reflective glass to
assist with removat.
6. Remove the Partially Reflective Glass by removing the
12 screws from the glass retaining bracket, starting on
either end and working your way to the middle, along
the top of the opening, ensuring that neither the bracket
Figure 5
Figure 4
Figure 3