Faber Mertik, Руководство пользователя

Страница: 7 / 12

User manual Symax
6 < < < <
Switch the step burner
For fires with step burner only!

Please note!
The step burner will not operate for 45
seconds after the start-up procedure.

Press the key until
appears in the display screen
and the flame picture will be
concentrated in the middle of
front of the burner.

Press the key until
disappears in the display
screen and the flame picture
will divide over the complete
length of the burner.
At the next start, the fire will start in the last
selected position.
Switch the LED Symbio effect

Please note!
This function is only for fires equipped with a
LED Symbio effect.
The Led Symbio module is independent of the
flames and is equipped with a standard light
pattern.
Turn on
Press the key until
appears in the display screen.
Turn off
Press the key until
disappears in the display
screen
Adjusting the light effect
The light effect can be adjusted in 6 LED modes:

Press the key until
flashes.

Press the or the key to
get to the desired light effect.

To confirm, press the key or
wait.
Now, the light effect is adjusted!
Extended functions
Countdown timer

Please note!

The countdown timer works in
Manual and Thermostatic mode only.

Max countdown time is 9 hours and
50 minutes.

At the end of the countdown time the
fire turns automatically off.
Set and turn on

Press the key until
appears in the display screen
and the hour indication will
blink.

Press the or key to set
the hour.

To confirm press the key
and the minute indication will
blink.

Press the or key to set the minutes.

To confirm and start, press the key or
wait a few seconds.
Turn off
Press the key until disappears in the display
screen.
Thermostatic mode

Please note!
For a proper functioning of the Thermostatic
mode, it is necessary that the remote control
is installed in the wall bracket in the
prescribed location (see section 3.1).
The room temperature is measured and compared
to the selected temperature. The flame height is
then automatically adjusted to achieve the
selected temperature.
Set

Press the key until
appears in the display screen
and the temperature
indication flashes.

Press the or key to set
the temperature.

To confirm and start press the
key, or wait a few seconds.