Faber MatriX 450/500 III, Руководство по установке

Страница: 14 / 32

Installation manual Matrix 450/500 III and MatriX 450/650 III
14 < < < <

Give advice and instructions on care and
cleaning of the glass:

Emphasize the danger of fingerprint burns
at the glass.

Handover to customer:
o
installation manual;
o
user manual;
o
decoration instruction card;
o
suction cups;
o
sample Faber glass polish.
9 Annual maintenance
Check
Check and clean if necessary:

the combustion chamber;

the burner

the pilot flame;

the wooden logs for breakage;

the glass(es);

the outlet.
Replace chips and/or glass granulate if necessary.
Cleaning
Remove the front glass (see chapter 5).
You can clean the glass with Faber glass polish.
This is a specially formulated cleaning agent that
can be ordered at authorized Faber dealers.
Never use aggressive cleaning agents or abrasive
products.

Please note!
Avoid fingerprints on the glass; these are no
longer removable once the fire is used.
Now carry out check-up as described in chapter 7.
For an extensive maintenance instruction "mainte-
nance protocol gas fires" see:
10 Conversion to other gas type
This can only be done by replacing the burner. To
do so, please contact your dealer. Always provide
the type and serial number of the appliance when
ordering.
11 Flue calculation
A simple way to calculate whether the exhaust
configuration is possible in combination with your
fireplace, use the “Faber Flue App V2”:
This is available free of charge and can be down-
loaded via:
Internet:
Android and PC (Windows Store, (Windows 10)).
App Store:
iPhone, iPad and Mac.
Google Play:
Android smart phones and Android tablets.
Alternatively, you can use the calculation sheet
(see chapter 13).
The options for flue lengths and any flue restrictors
are defined in a restrictor table, see 11.1. Start
Length (STL), Total Vertical Height (TVH) and Total
Horizontal Length (THL) are used in the table.

Start length (STL):
The first part that is placed on the fire-
place and represents a certain value (fig.
12.1, 12.2 and 12.3 A, N and F). You can
find this value in the upper row of the re-
strictor table.

Total Vertical Height (TVH):
TVH is the height difference measured
from the top of the appliance to the out-
let. This can be measured or determined
in the building plan. For clarification, see
also the TVH indication in the drawings
(fig. 12.1, 12.2 and 12.3).

Total Horizontal Length (THL):
THL is the Total Horizontal Length and
consists of elbows and pipes entirely in
the horizontal plane. See elbows I, K and Q
and the elements H, J, L, M, P and R
(fig. 12.1 and 12.2).