Faber HEAVEN 2.0 X FLAT KL A90/2, Руководство пользователя

Страница: 7 / 144

T3 Short Turns the motor on at the third speed. Fixed
Long with light or
motor on
Turns the motor on at the Intensive speed.
This speed is timed for 6 minutes. At the end of the time, the system
automatically returns to the previously selected speed. If activated
with the motor off, once the time has elapsed, it switches to OFF
mode.
Flashing
Long with all
loads off (motor
and lights)
The Filter saturation alarm is reset . All the LEDs flash three
times.
Signals the Metal Grease Filters saturation alarm and the need to
wash them. The alarm goes into operation after 100 hours of actual
hood work.
LED T2 and T3 on fixed
with hood off.
Signals the Activated Charcoal Odour Filter saturation alarm. The
alarm goes into operation after 200 hours of actual hood work.
LED T2 and T3 flashing
with hood off.
T4 Short AUTO Mode
Activates/deactivates the Automatic operating mode.
Each time other keys are pressed, the AUTO mode is deactivated.
The AUTO mode is activated by pressing the button or when the
Paired Induction Hob is turned on. The hood speed will be set auto-
matically using the highest power level present on the hob zones.
When the induction hob is switched off, the last speed implemented is
maintained for 5 seconds and then speed 1 for 15 minutes. At the end
of the 15 minutes the motor is switched off. The state of the lights is
not changed.
Fixed on:
AUTO mode activated.
Off:
AUTO mode temporarily
disabled.
Long with light
on and motor off
Induction/Gas Hob Selection
Select the type of hob in use, either Induction or Gas.
The Induction Hob type is set by default.
1 Flash: confirms Induc-
tion Hob selection.
2 flashes: confirms Gas
Hob selection.
Recommended pairing sequence between devices:
1 - K-Link mode (See remote control manual)
2 - K-Link pairing (See hood manual)
3 - Remote control-hood pairing (See remote control manual)
4 - K-Link pairing (See hood manual)
5 - Hob-Hood pairing (See induction hob manual)
5. REMOTE CONTROL
• This appliance can be controlled us-
ing a remote control.
• ATTENTION : before proceeding, ac-
tivate K-Link Mode on the remote
control (see the device manual for
further details).
6. LIGHTING
• Please contact the Service Depart-
ment to change it ("Please contact
the service department to purchase
it").
7