Faber Gala opti-myst, Инструкция по установке

Страница: 18 / 40

L
17 < < < <
The Gala has a glass back panel, if not desired can this be removed. To do this unscrew the 4 screws
of the back plate, remove the glass and mount the back plate using the 4 screws.
Build up the rest of the surround and ensure that the glass can be removed.
2.4.3 Installation as one sided without surround or as a see through.
The Gala can be built in a wooden casing.
The Gala has a glass back panel, if not desired can this be removed. To do this unscrew the 4 screws
of the back plate, remove the glass and mount the back plate using the 4 screws.
If the Gala will be built in as a see-through, remove the back plate by unscrewing the 4 screws. The
glass is visible.
Ensure that the appliance is levelled, and that the glass can be removed.
The appliance can be screwed to the casing with 2 screws. Ensure that there is adequate ventilation
in the casing.
The Gala is supplied with a MDF drawer which can be painted in every desired colour.
2.4.4 Placing the log set.
Place the log set in accordance with fig. 4.1 or in case of see through 4.2 and ensure that the
opening is not covered and put the chips on the bottom in between the logs of wood (also see the
supplied log set card).
Although the log set can be arranged in a different manner or removed altogether, the best flame
effect is reached by arranging the log set in accordance with the instructions. Do not add any
flammable decorations.
2.5 User manual
2.5.1 Instructions for use
1. First fill the water tank before the appliance is switched on. (see par. 2.8.2).
2. Only pull the drawer in order to operate the fireplace, refill the water tank or replace a
light, otherwise it may lead to a high water level in the collection reservoir, which will lead
to a lower flame effect. If this happens, empty the collection reservoir as indicated in par.
2.9.2.
3. With flame height set to minimum, the water use will be 40 ml per hour, and the appliance
will burn three times as long as when the flames height is set to maximum.
4. Do not move or replace the fireplace while there is water in the water tank or the
collection reservoir.
5. The flames will move more realistically when the button for flame control is turned low.
6. Give the flame generator some time to react to changes when you change the flame effect.
7. If the appliance is not used for a period longer than 2 weeks, empty the water tank and the
collection reservoir en dry them with a cloth.