32
Rack Positions
It is important to place the wire grill into
the oven properly. Do not allow wire rack to
touch rear wall of the oven. Rack positions
AREªSHOWNªINªTHEªNEXTªlGUREª9OUªMAYªPLACEª
a deep tray or a standard tray in the lower
and upper wire racks.
Installing and removing wire racks
4OªREMOVEªWIREªRACKSªPRESSªTHEªCLIPSªSHOWNªWITHªARROWSªINªTHEªlGUREª
lRSTªREMOVEªTHEªLOWERªANDªTHANªTHEªUPPERªSIDEªFROMªINSTALLATIONªLOCATIONª
To install wire racks; reverse the procedure for removing wire rack.
Replacing Oven Lamp
WARNING:
To avoid electric shock, ensure that the appliance circuit is
open before changing the lamp. (having circuit open means power is off)
First disconnect the power of appliance and ensure that appliance is cold.
2EMOVEªTHEªGLASSªPROTECTIONªBYªTURNINGªASªªINDICATEDªINªTHEªlGUREªONªTHEª
LEFTªSIDEª)FªYOUªHAVEªDIFlCULTYªINªTURNINGªTHENªUSINGªPLASTICªGLOVESªWILLª
help you in turning.
Then remove the lamp by turning, install the new lamp with same
SPECIlCATIONSªª
Reinstall glass protection, plug the power cable of appliance into electrical
socket and complete replacement. Now you can use your oven.
Type G9 Lamp
Type E14 Lamp
Rack 4
Rack 3
Rack 2
Rack 1
220-240 V, AC
15-25 W
Figure 13
220-240 V, AC
15 W
Figure 14
