Faber Cylindra Isola Gloss Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 96

Faber Cylindra Isola Gloss Скачать руководство пользователя страница 9

EN

9

9

INSTALLATION

Drilling the Ceiling/shelf and fixing the frame

DRILLING THE CEILING/SHELF

• Use a plumb line to mark the centre of the hob on the ceiling/support shelf.
• Place the drilling template

21

provided on the ceiling/support shelf, making sure that the

template is in the correct position by lining up the axes of the template with those of the hob.

• Mark the centres of the holes in the template.
• Drill the holes at the points marked:

• For concrete ceilings, drill for plugs appropriate to the screw size.
• For hollow brick ceilings with wall thickness of 20 mm: drill ø 10 mm(immediately insert

the Dowels

11

supplied).

• For wooden beam ceilings, drill according to the wood screws used.
• For wooden shelf, drill ø 7 mm.
• For the power supply cable feed, drill ø 10 mm.
• For the air outlet (Ducted Version), drill according to the diameter of the external air ex-

haust duct connection.

• Insert two screws of the following type, crossing them and leaving 4-5 mm from the ceiling:

• For concrete ceilings, use the appropriate plugs for the screw size (not provided).
• for Cavity ceiling with inner space, with wall thickness of approx. 20 mm, Screws

12h

,

supplied.

• For wooden beam ceilings, use 4 wood screws (not provided).

• For wooden shelf, use 4 screws

12g

with washers

22

and nuts

23

, provided.

«
...
7
8
9
10
11
...
»

Содержание Cylindra Isola Gloss

































































































Отзывы:

Нет отзывов