Faber Cylindra Isola Gloss Скачать руководство пользователя страница 15

Страница: 15 / 96

Activated Charcoal Filter (Recirculation Version)

This cannot be washed or regenerated, and must be changed when led

starts to flash, or at

least once every 4 months. The Alarm signal, if it has been activated, only appears when the
Suction motor is turned on.

Activating the alarm signal

• In Recirculation Version Hoods, the Filter Saturation Alarm must be activated on installa-

tion or at a later date.

• Turn the Lights and the Suction Motor off.
• Press button

and hold it for

5 seconds

until the LED flashes twice in confirmation:

CHANGING

Resetting the alarm signal

• Turn the Lights and the Suction Motor off.
• Press

and hold for at least 3 seconds, until LED

flashes three times in confirmation.

Changing the Filter

• Open the lighting unit by pulling on the notch provided.
• Remove the Metal Grease Filter
• Remove the saturated Activated charcoal filter, using

the hooks provided.

• Fit the new Filter, hooking it into place.
• Fit the Grease filter and the Light Unit back into place.

Содержание Cylindra Isola Gloss

































































































Результаты поиска

Содержание Cylindra Isola Gloss

Отзывы:

Faber Cylindra Isola Gloss, Инструкция по эксплуатации, Страница: 15 / 96

Результаты поиска

Содержание Cylindra Isola Gloss

Отзывы: