Faber Clear, Руководство по установке

Страница: 10 / 28

L
9 < < < <
4 Preparation and Installation instructions
4.1 Gas connection
The gas connection must comply with locally valid standards.
We advise Pipe work from the meter to the appliance must be of adequate size., with near
the appliance a gas isolater tap that should always be accessible. Place the gas connection
in such a way that this is easily accessible, and that before service, the burner unit can be
disconnected at all times.
4.2 Electric connection
If an adapter is used for the power supply, then a wall socket 230VAC – 50Hz must be
mounted in the close neighbourhood of the hearth.
4.3 Preparation of the appliance
•
Remove the packaging of the appliance . Make sure the gas pipes underneath the
appliance are not damaged.
•
Clear a safe space to store the frame and the glass.
•
Remove the frame , (if necessary) and the glass and take the separately wrapped
parts out of the appliance
•
Prepare the gas connection to the gas control valve.
4.4 Placing the appliance
Take the installation requirements into account (see chapter 3)
Place the appliance into the proper position and if necessary, adjust the height with the
adjustable legs.
Adjusting the height and leveling the hearth with a spirit level.(see fig. 1.5)
•
Rough height adjustment:
o
with the extending legs, or the long additional legs.
•
Accurate:
o
with the rotating adjustable legs.