Faber CADRA, Руководство по установке и инструкция пользователя

Страница: 5 / 26

UK/IRL
7
UK/IRL
6
3.1 Builders opening and surround (continuing)
If the builders' opening is constructed out of non-combustible
composition board (Fibrelux) and you install the appliance without a
mantel then:
- Ventilate the space above the appliance (min. 1000 mm
2
).
- Always fit the DC convection set.
- The plaster of the outside has to be resistant to a high
temperature. Use therefore the plaster materials especially made for
this, to prevent discoloring (min. 100 °C temperature resistant).
If the appliance is to be fitted against a wall with combustible
cladding, the cladding must be removed from the area covered by the
surround.
The minimum height from the top surface of the fire to the underside
of any shelf made from wood or other combustible materials is as
follows:
- For a shelf up to 150 mm deep – Minimum height = 350 mm
(fig. 1).
- If the shelf depth is greater than 150 mm add 50 mm to the upper-
clearance height for every 25 mm increase in shelf depth.
- Side clearance = Minimum distance from the side of the fire frame
to combustible material = 150 mm.
fig. 1
table 1
B Bu uiilld de errss o op pe en niin ng g ((m mm m)) S Sp pe eccttrra a C Ca ad drra a P Pa an no orra am ma a P Prriissm ma a S Siillv va a
A Opening width 780 680 810 710 600
B Opening height 705 805 710 710 715
C Opening depth (min.)430 430 430 430 350
S Sh he ellff d diim me en nssiio on nss ((cco om mb bu ussttiib blle e))
D Min. height shelf from top frame 350 350 350 350 350
E Depth shelf max. 150 150 150 150 150
D Diim me en nssiio on nss ((m mm m))
F Box width 752 652 752 652 575
G Box depth 395 395 395 395 309
H Box height 714 814 714 714 693
I Frame width 790 690 875 775 629
J Frame height 720 820 732 732 727
K Frame thickness 22.5 22.5 122 124 15
L Position flue (behind frame)256.5 256.5 255 255 190
M Position flue (from the back side box)140 140 140 140 119
L M
F
I
C
B
A
J
E
D
G
K
H