UK/IRL
31
UK/IRL
30
8. SERVICING
To ensure safe, efficient operation of the appliance, it is necessary to
carry out routine servicing at regular intervals.
It is recommended, that the fire is inspected/serviced by a competent
person at least once a year.
IIm
mp
po
orrtta
an
ntt
T
Tu
urrn
n o
offff tth
he
e g
ga
ass ssu
up
pp
pllyy b
be
effo
orre
e cco
om
mm
me
en
ncciin
ng
g a
an
nyy sse
errv
viicciin
ng
g.. A
Allw
wa
ayyss tte
esstt
ffo
orr g
ga
ass sso
ou
un
nd
dn
ne
essss a
afftte
err rre
effiittttiin
ng
g tth
he
e a
ap
pp
plliia
an
ncce
e.
The pilot and flame sensing device fitted to this fire is also a safety
device. If for any reason any part of the pilot assembly is to be
replaced the entire assembly including the pilot burner,
thermocouple, electrode and injector must be exchanged complete for
a pilot assembly from the original manufacturer only.
8.1 Routine annual servicing
1. Clean (if necessary):
- the pilot system;
- the burner;
- the combustion chamber;
- the glass.
2. Check the log lay and replace the embers (if applicable).
3. Do the functional test as described at page 27.
4. Check the flue system and terminal on damage and soundness
(visual inspection).
N
No
otte
e
The logs contain Refractory Ceramic Fibre which when cut or broken
open can be an irritant to skin and the respiratory tract. Always wear
gloves, do not blow dust into air and clean up using a vacuum
cleaner equipped with a HEPA filter. Never place extra elements of
any kind into the combustion chamber. To guarantee good
combustion, the log set may only be installed in the way specified by
Faber International. Any other arrangement can lead to soot on logs
or window. Do not use the fire with broken or missing logs.
8.1.1 Cleaning the glass
Depending on the intensity of use, you can get a deposit on the
glass. This can be removed with a special ceramic glass cleaner
(ceramic cook-top cleaner) as follows:
1.
Remove the door or front as described at 4.2.
2. Clean the glass. Handle the glass with clean hands, wear gloves if
possible.
3. To fit the glass, proceed in reverse order. Make sure that the log
set has been installed correctly before fixing the glass.
A
Atttte
en
nttiio
on
n::
Before placing the glass: check the glass sealing rope is in good
condition and makes an effective seal. Be sure that there are no
fingerprints on the glass. It is not possible to remove those prints
after you burn the appliance for a while (they are burnt in). Place
the glass in front of the appliance and fix the glass frame or use the
glass clamps.
8.1.2 Cleaning the combustion chamber and burner
You can clean the combustion chamber with a vacuum cleaner
e
exxccllu
ud
diin
ng
g tth
he
e b
bu
urrn
ne
err ssu
urrffa
acce
e..
If the burner is visibly damaged, this can affect the distribution of
the flame, if so then replace the burner.
