Faber CADRA NOVA Скачать руководство пользователя страница 29

Страница: 29 / 29

UK/IRL

12. DISPOSAL OF THE PACKAGING

AND THE APPLIANCE

The appliance packaging is recyclable. The packaging could include

the following materials:

- cardboard;

- CFC-free foam (soft);

- wood;

- plastic;

- paper.

These materials should be disposed responsibly and in conformity

with government regulations.

Batteries are considered chemical waste. The batteries should be

disposed of responsibly and in conformity with government

regulations. Remove the batteries before disposing of the remote

control.

Information on how to responsibly dispose of discarded appliances

can be obtained from the local authorities.

11. CLEANING AND SERVICE

INSTRUCTIONS

Important:

Turn off the fire and allow it to cool down before

commencing cleaning.

It is recommended that the fire is inspected/serviced, by a competent

person at least once a year.

To maintain the finish on the trim wipe with soft damp cloth only. Do

not use abrasive cleaners, polish or solvents as these can damage

the surface finish.

Содержание CADRA NOVA






























Результаты поиска

Содержание CADRA NOVA

Отзывы:

Похожие инструкции для CADRA NOVA

Бренды по названию

Популярные бренды

Faber CADRA NOVA, Руководство по установке и инструкция пользователя

Результаты поиска

Содержание CADRA NOVA

Отзывы:

Похожие инструкции для CADRA NOVA

Бренды по названию

Популярные бренды