TM2 X TT-50
29
A4518_6H04_Rev.A
PROCEDURE 1
To execute the ADD FROM function
1- Already stored remote control:
a. Position yourself on the desired
channel and carry out the
following sequence:
2- TM2 X TT-50 to be stored:
a Main menu / Programming / Devices / DEVICE CREATED / Add from + STORE
b. After storing, check if the motor operates correctly using the UP / DOWN / STOP
keys.
3- After checking, press END PROCEDURE on TM2 X TT-50.
PROCEDURE 2
To execute the ADD TO function
1- Already stored TM2 X TT-50:
a Main menu / Programming / Devices / DEVICE CREATED / Add to + STORE.
b. Wait for the movements of the motor, which will confi rm that it is working correctly.
2- Remote control to be stored:
a.
Position yourself on the desired
channel and carry out the following
sequence.
b. After storing, check if the motor operates correctly using the UP / DOWN / STOP
keys.
3- After checking, press END PROCEDURE on TM2 X TT-50.
PROCEDURE 3
To execute the functions ADD TO / FROM on two TM2 X TT-50 remote
controls
1- Already stored TM2 X TT-50:
a. Main menu / Programming / Devices / DEVICE CREATED / Add to + STORE.
b. Wait for the movements of the motor, which will confi rm that it is working correctly.
2- TM2 X TT-50 to be stored:
a. Main menu / Programming / Devices / DEVICE CREATED / Add from + STORE.
b. After storing, check if the motor operates correctly using the UP / DOWN / STOP
keys.
3- After checking, press END PROCEDURE on both remote controls.
A
B
B
2sec
B
EN
