FAAC TM XA R 433, Руководство пользователя

Страница: 3 / 12

2 2 3
72
90
182
ENGLISH
TM XA R 433 (RADIO ANEMOMETER WITH SUN SENSOR)
1 DESCRIPTION AND DIMENSIONS
SUN
SENSOR
WIND
SENSOR
ELECTRICAL
CONNECTIONS
The anemometer TM XA R is a radio-communication device, fed with 230 V.
This device operates in two modes:
) STANDARD MODE (i.e. for sun blinds; factory default):
The anemometer commands the up operation of the rolling shutter if strong wind or low light are present and the
down operation in the presence of light.
2) REVERSE MODE (i.e. for rolling shutters; can be activated according to chapter 5)
The anemometer commands the down operation of the rolling shutter if wind or low light are present and the up
operation in the presence of light.
Fig.1
Power supply
230 V
~
50/60 Hz
Transmission frequency 433.72 Mhz
Light sensor sensitivity 0,200 ÷ 50
Klux
Wind sensor sensitivity 5 ÷ 60
Km/h
Use temperature -20 ÷ +55
°C
Protection class IP 55
The wind sensor can never be disactivated since it is a protection device for the rolling shutter
when strong wind is present. Its sensitivity can be adjusted through trimmers.
The sun sensor, (from the factory is OFF) , can be activated and disactivated using a dedicated
remote control (i.e. TM XT1S 433 , TM XT6S 433 ). If the sensor is off, the remote controls stored in
the motor memory can command the rolling shutter. If the sensor is active, the remote controls
stored in the memory motor are inhibited: the motor can only be controlled by the TM XA R 433
2 FASTENING AND ELECTRIC WIRING
Dimensions in mm
Fig.2
NEVER SECURE THE SUN SENSOR DIRECTED DOWNWARD