![background image](http://html1.mh-extra.com/html/faac/fci4300/fci4300_manual_3108833009.webp)
9
Powering Up & LEDs
Perform a final check of wiring and ensure the antenna is connected before switching on the
power. Once the power is switched on, the power LED should illuminate.
Installing the Programmer APP for the first time
If you are using an Apple or Android smart phone, download and install the FAAC Cell Access
Pro APP. It will make programming much easier.
Note: You may notice the app “Cell Access” on the store. This is for homeowners to use.
CPU
Flashing = standby
Constant ON/OFF = busy
SIGNAL STRENGTH
1 flash = poor (1 bar)
2 flashes = low (2 bars)
3 flashes = good (3 bars)
4 flashes = Strong (4 bars)
5 flashes = searching
POWER