Estate Slide E-SL 1200
One Touch EZ Programming
NOTE: Before beginning the one touch learning procedure be sure to have the limit magnets set up
. These will
let your gate know where to stop during the learning process.
Enter Learning Mode
Enter the programming mode by pressing
P1
6 times until
all 5 LEDs (A,B,C,D,E) are lit. This is the learning mode.
Programming
While the 5 function LEDs (A,B,C,D,E in picture) are lit
steadily, briefly press (about 1 second) the
P2
button.
The operator or operators start the opening maneuver, and
the function LEDs begin flashing. Wait for the operator or
operators to reach the opening stops. The learning procedure
has finished.
Press P1 once more to exit the learning mode
before attempting to operate the opener
.
You may now test your gate opener or continue on with changes to the factory speed, force, delay settings.
To test
your opener, briefly touch a wire from terminal 1 to one of the negative terminals (12, 13, 14, or 15).
10.1