Wiring The Operator Arm(s)
For the Master Operator:
In ter minal block CN2 insert the
Red
wire in APM1 and
Black
wire in CHM1.
For the Slave Operator
(if dual system)
:
In terminal block CN2 insert the
Red
wire in APM2
and
Black
wire in CHM2.
*During the learning process, if the gate begins to move in the wrong direction. Stop
the gate operator by removing power or tripping RESET switch. Then swap the
brown and blue wires, this will make the operator start in the right direction when
you restart the run time learning procedure.
4.7
RD: Red
BL: Black
RD
BL
RD
BL
