FAAC AT- 4/868 UHF, Руководство по установке

Страница: 7 / 25

AT-4/868 UHF
FAAC S.p.A. Via Calari, 10 – 40069 – Zola Predosa (BO) - Italy Page 7 of 25
3 CONNECTIONS
3.1 FASTENING THE CABLES
The cables of the AT-4/868 UHF are connected using EMC type cable glands.
Use a shielded cable for the power supply.
Mounting instructions:
1. Fit the nut (1), the seal (2) and the cable gland (3)
on the cable.
2. Cut the external sheath to the required length.
3. Fold the shielding screen (4) on the cable gland
and reduce the shield as shown in
Fig. 5: Shielded cable
4.
Screw the nut (1) until the seal (2) starts
to come out. See Fig. 6.
Fig. 6: Tightening
For a water-proof protection a correct mounting and tightening of the EMC
connectors are of essential nature.
See Appendix A for any details on the cable glands.